Werbung
EN
26
10. Mark the installation position of the door and the size of the fixed screws. If
the upper edge of the door is not as high as the upper edge of the cupboards,
please adjust the size accordingly. Mark the positions of the screws on the
door, and make sure the size is as accurate as 569±1.
11. Pull out the movable fan-shaped door frames and fix with the connection
board together with ST2.5*8 screw ,then fix the fan-shaped door frames on
the door with screws. Make sure the frames are symmetrical. Install the door
into the cooker hood, the two sides of the door can be pulled to the end and
the door can be safely locked. If the door cannot be safely locked, you can
release the plastic handle.
Werbung
