Overview - Elcometer 1510 Gebrauchsanleitung

R
T
hank you for purchasing this Elcometer 1510 Conical Mandrel
Bend Tester.
Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply
of inspection equipment for coatings and concrete. Our products
cover all aspects of coating inspection, from development through
application to post application inspection.
Your Elcometer 1510 Conical Mandrel Bend Tester is a world
beating product.
With the purchase of this product you now have access to the
worldwide service and support network of Elcometer. For more
information visit our website at www.elcometer.com

1 OVERVIEW

The Elcometer 1510 Conical Mandrel Bend Tester is used to
determine the elasticity, adhesion and elongation of coatings on
sheet metal.
The specimen is clamped against a conical mandrel and is bent
around the mandrel by a roller mounted on a hand operated lever.
The diameter of the mandrel at the point where the coating starts
to crack can be determined from a scale marked on the specimen
clamp.
The tester is of heavy duty construction and provides excellent
resistance to deformation and long service life.
1.1 STANDARDS
The Elcometer 1510 Conical Mandrel Bend Tester can be used in
accordance with the following National and International
Standards:
ASTM D 522 BS 3900 E11
DIN ISO EN NF 6860 ECCA T7
www.elcometer.com en-2