Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident
prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power
tools can result in foreign objects being thrown
into your eyes, which can result in severe eye
damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shields and a full face shield
when needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Indicates a potential personal
Safety Alert
injury hazard.
Indicates DANGER,
HEDGE TRIMMER ATTACHMENT — HTA2000
Read
To reduce the risk of injury, user
Operator's
must read the operator's manual.
Manual
Always wear safety goggles or
safety glasses with side shields
Wear Eye
and a full face shield when
and Head
operating this product. Wear
Protection
an approved safety hard hat to
protect your head.
Wear Ear
Always wear ear protection
Protection
when operating this product.
Blade
The length of the blade
51cm
Length
Cutting
Max. Cutting capacity of the
Capacity
blade
Keep
To prevent electrocution, do not
sufficient
operate within 15m of overhead
distance
electrical lines. Contact with
away from
or use near power lines may
electrical
cause serious injury or electric
power lines
shock resulting in death.
Never attempt to operate your
power tool with one hand. Loss
of control of the power tool
Keep hands
resulting in serious or fatal
and feet
injury may result. To reduce the
away from
risk of cut injuries, keep hands
the cutting
and feet away from the cutting
tool
tool. Never attach a moving
cutting tool with your hand or
any other part of your body.
Ensure that other people and
Keep
pets remain at least 15m away
15m
Bystanders
from the hedge trimmer when
Away
it is in use.
This product is in accordance
CE
with applicable EC directives.
This product is in accordance
UKCA
with applicable UK legislation.
XX
EN
5