medicap Precise 6000 MI Gebrauchsanweisung Seite 65

3.4.3 Setting date & time
To access the "Date & Time" menu, tap on the area highlighted in red. The following menu guide appears:
Day Month
Use the and to set the date and time. The setting once effected needs to be confirmed by pressing
and stored. After successful setting, this must be confirmed with 0 and saved. The system software is then
re-booted.
By pressing you can quit the menu without any changes; no re-booting of the system software is needed.
Caution
The date and time can only be set if no application is running!
3.4.4 Oxygen therapy - Flow rate
After switching on and successfully passing the diagnostic mode the SET flow rate recommended by your
physician (oxygen output in litres/min) can be set by pressing the
The change is made in 0.2 l/min. steps; the required SET flow rate is shown for approx. 5 seconds and then
automatically changes to the ACTUAL flow rate.
•
Précise 6000 MI & Précise 6000 MSI minimum limit = 1 l/min.
•
Précise 6000 MI maximal limit = 5 l/min.
•
Précise 6000 MSI maximum limit = 6 l/min.
Précise 6000 MS / Précise 6000 MSI
Year Hour Minute
Rev.D 2024-10
and symbols.
65