Beeper isivu Montageanleitung Seite 19

5. SYSTEM CONNECTION
Classical plugging chart (I camera) - P.03
To connect the sgstem, please connect the canon connector of the camera with the canon conenctor of the 8 meters
extension cable provided in the kit.
Supply then the camera using the red wires & blacks located on the 8 meters extension cable. Connect the red wire to a
source12Vreversinglight (+) and the black wire with the mass (-).
Connect the yellow RCAconnectorand the redJACK connectorof the extension,with the yellow RCAconnectorand the
red JACK connector
The white RCA connector of the monitor remains alone. It is not useful, solelu if gou wish to connect one second optional
camera on your kit.
Plugging chart for installation of one secondcamera (option) - P.04
O Toconnectthesystem,pleaseconnectthe canonconnector o f thecamerawith the canonconenctor o f the8 meters
extension cable provided in the kit.
o Supplu then the camera using the red wires & blacks located on the extension of cable of 8 meters. Connect the red wire
to a source12Vreversinglight (+) and the black wire with the mass(-).
Connect the yellow RCA connector RCA and the red JACK connector of the extension, with the yellow RCA connector
and the red JACK connector
In the event of installation
be insulated, i.e. that it should be protected with an adhesive, to avoid ang involuntary contact.
of the monitor.
of the monitor.
of one second camera, the red JACK connector of the extension should not be connected and must