Stihl RCA 20.0 Gebrauchsanleitung Seite 49

19 Troubleshooting
Error LEDs on the
pressure was‐
her
-
1 LED flashes
red.
-
-
-
The pressure 1 LED lights
washer cuts out up steady red.
during operation.
-
-
Pressure washer -
runtime is too
short.
-
The operating -
pressure fluctua‐
tes or drops.
-
-
-
The shape of the -
water jet has
changed.
-
Detergent is no -
longer drawn in.
Connectors with -
pressure washer
0458-048-9601-A
Cause
The pressure washer
is too warm.
There is an error in
the battery.
No electrical contact
between the pressure
washer and the bat‐
tery
The battery is damp.
There is an error in
the pressure washer.
The pressure washer
is too warm.
The battery is too
warm or too cold.
There is an electrical
error.
The battery is not fully
charged.
The battery life has
been exceeded.
There is not enough
water.
The nozzle is blocked. ► Clean the nozzle.
The water intake
screen or water filter
is blocked.
The pressure washer
is leaking or faulty.
The nozzle is blocked. ► Clean the nozzle.
The nozzle is worn.
The container is
empty.
The gaskets of the
connections are not
greased.
Remedy
► Allow the battery to cool down or warm
up.
► Remove the battery.
► Allow pressure washer to cool down.
► Clean the nozzle.
► Remove the battery and reinsert it.
► Switch on pressure washer.
► If 1 LED continues to flash red: Do not
use the battery and contact a STIHL
authorized dealer.
► Remove the battery.
► Clean the electrical contacts in the bat‐
tery compartment.
► Insert the battery.
► Allow battery to dry,
► Remove the battery.
► Clean the electrical contacts in the bat‐
tery compartment.
► Insert the battery.
► Switch on pressure washer.
► If 1 LED continues to flash red: Do not
use the pressure washer and contact a
STIHL authorized dealer.
► Remove the battery.
► Allow pressure washer to cool down.
► Clean the nozzle.
► Remove the battery.
► Allow the battery to cool down or warm
up.
► Remove the battery and reinsert it.
► Switch on pressure washer.
► Fully charge the battery.
► Replace the battery.
► Open water tap fully.
► Make sure that a sufficient quantity of
water is available.
► Clean the water intake screen and water
filter.
► Have pressure washer checked by a
STIHL authorized dealer.
► Fit a new nozzle.
► Fill container with detergent.
► Grease the gaskets.
English
20.6.
19.3
49