MPM MOD-38 Bedienungsanleitung Seite 29

USING THE VACUUM CLEANER
1. Make sure the vacuum cleaner is properly assembled and the battery is charged.
2. Start the vacuum cleaner with the button (6) di-
rectly on the vacuum cleaner or with the button
(1) on the main handle (fig.8). The operation of the
buttons is independent of each other as long as
the vacuum cleaner is in the main handle.
3. Pressing the power button again makes the vac-
uum cleaner work with high suction power. An-
other press of the power button switches off the
vacuum cleaner.
4. The electric brush (15) with LEDs (16) illuminating
the vacuumed surface is activated together with
the vacuum cleaner. The multifunctional electric
brush is suitable for vacuuming all types of hard
surfaces and carpets.
5. The use of additional vacuum cleaner accessories
(small brush, crevice brush) is possible after re-
moving the vacuum cleaner from the main handle. Press the button (4) and remove the vacuum
cleaner from the main holder (2) and then connect a suitable accessory to the end of the vacuum
cleaner (fig.9).
Fig. 9
Fig. 8
EN
29