Environmental Protection - Kärcher WV 75 plus Originalbetriebsanleitung

Environmental protection

The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old
appliances. Batteries and accumulators
contain substances that must not enter the
environment. Please dispose of your old
appliances, batteries and accumulators us-
ing appropriate collection systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Start up
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Note: Please refer to page 2 for figures of
the appliance and the operation.
Illustration
1 Charger with charging cable
2 Basic appliance
3 Charging box
4 Charge/operations display
5 Support leg
6 Handle
7 ON/OFF switch for appliance
8 Dirt water reservoir, removable
9 Lock, dirt water reservoir
10 Suction head
11 Release, suction head
12 Attachment with removable lips, wide
13 Attachment with removable lips, narrow
14 Release, attachment
15 Spray bottle
16 Spray lever
17 Wiping attachment
18 Fixating ring
19 Micro-fibre wiping pad
20 Window cleaner concentrate
8
Assemble the appliance
Illustration
 Place the attachment on the suction
head with the removable lips until you
hear it lock in.
Note: Depending on the size and ac-
cessibility of the surface to be cleaned,
use the corresponding attachment
(wide or or narrow).
Attach the spray bottle and wiper
attachment and fill it with detergent
Note: Please note that after first activation
of the spray head the transport look will be
loosen.
Attach the wiping attachment
Illustration
 Remove the spray head from the spray
bottle.
 Attach the wiper attachment to the
spray head.
 Secure the wiper attachment and the
spray head with the fixating ring.
Illustration
 Attach the wiper pad to the wiper at-
tachment and secure with Velcro.
Fill the spray bottle
Illustration
 Fill the included concentrate (1 x 20 ml)
into the spray bottle and fill the bottle
slowly with clear water (makes 250 ml
of detergent solution).
 Close the bottle.
Charge the battery
Illustration
 Insert the charger delivered with the ap-
pliance into a proper socket.
 Insert the charging cable plug to the
back of the appliance.
Note: During the charging process, the
charge/operating display blinks. Once
the battery is fully charged, it will be per-
manently illuminated.
Recharge the battery after finishing
your work.
– 2
EN