eQ-3 homematic IP Home Control Unit HmIP-HCU1 Installations- Und Bedienungsanleitung Seite 30

TrHuaeshHHting
8.3.2 Status LEDs
Legend
The LED is o.
The LED ashes.
The LED lights up continuously.
Flashing code
-
- -
- -
Meaning
The Home Control Unit
starts.
The Home Control Unit
cannot connect to the
Internet and there is no
connection to the cloud.
The Home Control Unit
can connect to the inter-
net.
The connection to the
cloud is deactivated. The
Home Control Unit is in
oine mode.
There is no connection
to the cloud. The internet
connection is OK.
The connection to the
cloud is OK.
There is a device error in
the Homematic IP sys-
tem.
The top LED lights up red
at the same time.
The Homematic IP sys-
tem is OK.
Solution
No action required.
Check your internet con-
nection.
• Is the network cable
plugged in?
• Is the WiFi activated
on your router?
• Is the Internet LED on
the router lit?
No action required.
No action required.
Check your network set-
tings. Try again later.
No action required.
Restart the Home Control
Unit.
No action required.
30