Werbung
trt-um
7 trt-um
This chapter describes how to set up
your Homematic IP system step by
step.
First install the Homematic IP app
on your end device and set up your
Home Control Unit as described in the
following section. Once your Home
Control Unit has been set up success-
fully, you can add and integrate new
Homematic IP devices to your system.
7.1
Setting up the Home Control
Unit
The Homematic IP app is available
for iOS and Android and can be
downloaded for free from the
Apple App Store and the Google
Play store.
• Please download the Homematic IP
app from the Apple App Store or
the Google Play store and install it
on your end device.
iOS
Figure 8
Figure 9
7.2
Android
• Start the app.
• Scan the QR code (F) on the un-
derside of the Home Control Unit
or on the enclosed sticker. Alter-
natively, you can enter the device
number (SGTIN) of the Home Con-
trol Unit manually in the app.
XXXX
• Follow the installation steps in the
Homematic IP app.
LAN start-up
The Home Control Unit is initially
only searched for in the home
network. If the end device to be
registered is not in the same net-
work as the Home Control Unit,
you must rst press the system
button (the top LED lights up
purple).
Follow the instructions in the pai-
ring wizard.
For safety reasons, the authorisati-
on is valid for 5 minutes at a time.
Homematic IP
23
Werbung
