eQ-3 homematic IP Home Control Unit HmIP-HCU1 Installations- Und Bedienungsanleitung Seite 19

IgeHntents
1 IgeHntents
1x Homematic IP Home Control Unit
1x Wall mount
1x USB stick
1x Plug-in mains adapter
1x Network cable
3x Screws
2x Plugs
1x Operating manual
2 nfHrtiHnaHutthis
nu
Please read this manual carefully befo-
re operating your Homematic IP com-
ponents. Keep the manual so you can
refer to it at a later date if you need to.
If you hand over the device to other
persons for use, please hand over this
manual as well.
Symbols used:
Important! This indicates a ha-
zard.
Note. This section contains im-
portant additional information!
3 zrdinfHrtiHn
We do not assume any liability for
damage to property or personal
injury caused by improper use or
the failure to observe the hazard
information. In such cases, all
warranty claims are void. We ac-
cept no liability for any conse-
quential damage.
Do not use the device if there are
signs of damage to the housing,
control elements or connecting
sockets, for example, or if it de-
monstrates a malfunction. If you
have any doubts, please have the
device checked by an expert.
Do not open the device. It does
not contain any parts that need to
be maintained by the user. In the
event of an error, please have the
device checked by an expert.
For safety and licensing reasons
(CE), unauthorised changes and/
or modications to the device are
not permitted.
The device may only be operated
indoors and must be protected
from the eects of moisture, vib-
rations, solar or other methods of
heat radiation, cold and mechani-
cal loads.
The device is not a toy: do not
allow children to play with it. Do
not leave packaging material lying
around. Plastic lms/bags, pieces
of polystyrene, etc., can be dan-
gerous in the hands of a child.
For the power supply, only use the
original power supply unit (5.1
VDC/2600 mA) delivered with the
device.
The device may only be connec-
ted to an easily accessible power
socket outlet. The mains plug
must be pulled out if a hazard
occurs.
When selecting the installation
location, check for electrical wires
and power supply cables.
19