Ergosana Sana Bike 320 F Gebrauchsanweisung Seite 35

Sana Bike 320 F
The program selection menu appears.
The exercise programs 1–5 are set according to the parameters of standardised ergometry or
according to individual parameters in such a manner that the correct programs for the different
patient groups can be called up at the touch of a button.
Confirm program 1 with the right button "ok", and the window containing the settings menu for
ergometry program no. 1 appears.
Check the existing settings for:
• Type of load (Stage or Ramp)
• Initial load
• Increase in load
• Stage time
• Recovery load
Push the "change" button if the settings need to be altered.
The individual parameters then appear one after the other. Select the desired values with the
arrow buttons and confirm by pressing the "ok" button. The next parameter then appears. The
settings menu can be exited at any time by pressing the "cancel" button.
Article no.: 2.520091 Rev.: a Page 13 of 22