Unit Components; Display; Rotational Speed Display On Control Console - Ergosana Sana Bike 320 F Gebrauchsanweisung

Sana Bike 320 F
4

Unit Components

4.1

Display

The console is facing the user (not the patient) (factory setting)
It is possible to turn the console by 180 degrees for special applications such as patient training,
etc., so that the patient can reach the control elements and see the display.
All of the control electronics for all operation modes of the ergometer are located in the control
console.
A backlit graphic LCD display with 320 x 240 pixels and a surface of 100 x 75 mm featuring the
complete range of available information is located on the front side under a foil keyboard with a
see-through window. The control elements for the adjustment and operation of the ergometer
are located on the foil keyboard.
A clear LCD display with large figures is located on the control console's upper side. It shows the
rider the current number of pedal rotations per minute.
4.2

Rotational speed display on control console

n = crank rotations per min.
-1
U min
Article no.: 2.520091 Rev.: a Page 9 of 22