Sana Bike 320 F
6
Ergometry
This section describes ergometry with the internal ergometer software.
6.1
Defining the Automatic Load Programs
The following text field appears in the ergometer after it is switched on:
The menu item "Start ergometry" is highlighted with a black bar. This means the item is
activated. It is possible to select an exercise program directly from here and begin ergometry.
Beforehand, however, the five varying exercise programs must be defined according to the
examiner's needs and wishes. On delivery of the unit, each program is set with normal values
which cannot harm the patient in case they are accidentally activated.
Activate "Define program" via the arrow keys
.
Confirm with the right "ok" button.
Article no.: 2.520091 Rev.: b
Page 12 of 22