Fronius DPS 2500 Bedienungsanleitung Seite 46

Code n°: 50
Cause:
Remedy:
Code n°: 51
Cause:
Remedy:
Code n°: 51
Cause:
Remedy:
Code n°: 100 to 109
Cause:
Remedy:
Code n°: 150
Cause:
Remedy:
Power source -
Power source does not function
troubleshooting
Mains switch is on, but indicators are not lit up
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
46
Intermediate circuit-balance error
Contact After-Sales Service
Mains undervoltage: The mains voltage has dropped below the tolerance
Check the mains voltage
Mains overvoltage: The mains voltage has risen above the tolerance range
Check the mains voltage
HOST error
Contact After-Sales Service
No communication between HOST and Interface
Contact After-Sales Service
There is a break in the mains lead; the mains plug is not plugged in
Check the mains lead, ensure that the mains plug is plugged in
Mains socket or mains plug faulty
Replace faulty parts
Mains fuse protection
Change the mains fuse protection
Short circuit on the 24 V supply of SpeedNet connection socket or external
sensor
Unplug connected components