Panasonic EY7552 Bedienungsanleitung Seite 6

WARNING:
• Do not use other than the Panasonic
battery packs that are designed for use with
this rechargeable tool.
• Panasonic is not responsible for any
damage or accident caused by the use of
recycled or counterfeit battery pack.
• Do not dispose of the battery pack in a fire,
or expose it to excessive heat.
• Do not drive the likes of nails into the battery
pack, subject it to shocks, dismantle it, or
attempt to modify it.
• Do not allow metal objects to touch the
battery pack terminals.
• Do not carry or store the battery pack
in the same container as nails or similar
metal objects.
• Do not charge the battery pack in a high-
temperature location, such as next to a fire
or in direct sunlight. Otherwise, the battery
may overheat, catch fire, or explode.
• Never use other than the dedicated
charger to charge the battery pack.
Otherwise, the battery may leak, overheat,
or explode.
• After removing the battery pack from
the tool or the charger, always reattach
the pack cover. Otherwise, the battery
contacts could be shorted, leading to a risk
of fire.
• When the Battery Pack Has Deteriorated,
Replace It with a New One. Continued
use of a damaged battery pack may result
in heat generation, ignition or battery
rupture.
EY7552_EU.indb 6
II. ASSEMBLY
Attaching or Removing
Sock et
1. Attaching Socket
1) Remove the rubber ring and pin.
rubber ring
2) Attach the socket putting each holes.
3) Attach the rubber ring and pin in reverse
order of 1).
NOTE:
Attach socket firmly by using pin and
rubber ring.
Retainer ring is only for temporary
fixing.
2. Removing Socket
1) Remove the rubber ring and pin.
rubber
ring pin
- 6 -
groove
pin
2013-8-8 16:29:27