Ego Power+ ZERO TURN ZT4200E-S Bedienungsanleitung Seite 31

PROBLEM CAUSE
The mower does not turn ◾
Failure of electronic or mechanical
left/right when the steering
components.
wheel is rotated.
◾
The return path of the accelerator
pedal is clogged with debris.
The mower fails to stop
◾
when releasing the
The CCS button is pressed
accelerator pedal.
unintentionally while driving. The
mower is in cruise-control mode
◾
The CCS function cannot be The CCS button is not pressed
activated or turned off. properly.
◾
The mower status indicator does not
show green and the mower is not
ready for driving.
The mower fails to drive
reverse when left/right
◾
paddle(s) is pulled toward The left/right paddle(s) is not pull
the operator. toward the operator properly.
◾
The left/right paddle(s) is not kept
pulled toward the operator.
◾
The left/right paddle(s) is broken.
SOLUTION
◾
Call EGO Customer Service Center for repair.
◾
Check and remove the debris.
◾
Check if the CCS icon is illuminated on the LCD screen, and exit
the CCS as necessary. Refer to chapter "USING CRUISE CONTROL
(CCS)"
◾
Press the CCS button until the CCS icon is illuminated on the LCD
screen, or disappears from the LCD screen.
◾
Follow the section "STARTING THE MOWER" to make the mower
status indicator show green and mower is ready for driving.
◾
Pull left paddle or right paddle or both paddles simultaneously
toward the operator until a "click" sound is heard.
◾
To drive in reverse, at least one of the paddles has to be kept
pulled toward the operator.
◾
Contact a qualified service technician for repair.
ZERO TURN RIDE-ON MOWER — ZT4200E-S
EN
31