Ego Power+ ZERO TURN ZT4200E-S Bedienungsanleitung Seite 26

Leveling the mower deck
EN
a. When to level (Fig. G7 – G9)
b. Before leveling
◾
Checking the cold tire pressure (Fig. G10)
◾
Check the cutting blades. Remove and replace worn, cracked,
and/or bent blades as necessary.
c. Preparation for leveling (Fig. G11)
d. How to leveling
◾
To make side-to-side adjustment (Fig. G12)
◾
To make front-to-rear adjustment (Fig. G13)
CALIBRATING THE MOWER TRACKING SYSTEM
(Fig. H1 – H2)
NOTICE: The beeping indicator will sound once both when starting
calibration and when the calibration is finished.
NOTE: The calibration completed for one of the driving modes
("CONTROL", "STANDARD", "SPORT") maybe not available for the
other two modes. Calibrate the steering wheel in each driving mode
independently as needed.
RESETTING THE MOWER TO INITIAL FACTORY SETTING
(Fig. I)
NOTICE: The beeping indicator will sound once both when starting
resetting and when the resetting is finished.
NOTE: When the resetting is successful, below settings will return to the
initial factory setting:
◾
driving mode
◾
driving speed
◾
calibration of the steering wheel
26
ZERO TURN RIDE-ON MOWER — ZT4200E-S
STORAGE & TRANSPORT
TRANSPORTING THE MOWER (Fig. J1 – J5)
J2-1 Ramps
NOTICE: Secure the mower as needed, using straps or cables to
prevent movement during transport.
STORAGE (Fig. K1 – K2)
NOTICE: Remove the battery packs and store the batteries refer to the
corresponding manuals.
Clean and check the mower before storage refer to the sections
"CLEANING THE MOWER" and "RECOMMENDED MAINTENANCE
SCHEDULE(S)".
Protecting the environment
WEEE (Waste Electrical and Electronic Equipment) Do not
dispose of electrical equipment, used battery and charger
into household waste! Take this product to an authorized
recycler and make it available for separate collection.
Electric tools must be returned to an environmentally
compatible recycling facility.
J2-2 Straps