First Use; Daily Use - IKEA NUTID Gebrauchsanleitung

ENGLISH
Control panel
A
A
"Fast Cooling" function
B
Indication of temperature settings

First use

Connect the appliance to the mains power
supply.
The ideal temperatures for preserving food
have already been set at the factory (MED).

Daily use

Guide to selecting functions temperature
selection
Press the pushbutton on the control panel to
adjust the temperature.
Temperature selection pushbutton is used
to set desired temperature level, from
warmest through lower to coldest . Pressing
pushbutton setpoint will change cyclically.
Temperature set-point is done for both
compartments at one time - fridge and
freezer.
At fi rst plug-in of appliance factory set-point
is chosen - medium position.
Following table shows set-points level:
High temperature
Mid-high temperature
(Eco green)
Middle temperature
Mid-low temperature
Low temperature
B C
C
Temperature selection / "Fast Cooling"
(3 sec. minimum) pushbutton
D
Internal light switch
Note: After switching the appliance on,
it will be necessary to wait for 4 to 6
hours before a temperature suitable for a
standard appliance load is reached.
Legend:
Led OFF
Fast Cooling
The use of this function is recommended
when placing a very high quantity of food in
the refrigerator compartment.
By pressing and hold the pushbutton on
the control panel for 3 sec. it is possible to
increase the cooling speed of the foods
inside the refrigerator compartment.
Fast Cooling
ON
The Fast Cooling light (yellow LED) will turn
on.
The function is automatically deactivated
after 6 hours.
The Fast Cooling function can be manually
deactivated by pressing and hold the same
pushbutton on the control panel for 3 sec.,
the yellow LED is off.
D
Led ON
Fast Cooling
OFF
7