IKEA NUTID Gebrauchsanleitung Seite 10

ENGLISH
Note:
- Bear in mind that a full appliance will
stay cold longer than a partially fi lled
one.
- If ice crystals are still visible on the food,
it may be frozen again, although fl avour
and aroma may be affected.
- If food is found to be in a poor condition,
it is best to throw it away.
Replacing the light
Always disconnect the refrigerator from the
power supply before replacing any light
bulb.
If the inside light is not working, it is
necessary to:
1. Remove the light cover: put the fi ngers
into the side ventilation holes, stretch the
cover gently and move it upwards.
2. Check the bulb. If necessary unscrew the
broken bulb and replace it with the new
one (max power of the light bulb is given
on the light cover).
3. Put on the light cover.
Do not leave the bulb uncovered.
Abnormal appliance operation
When the product is plugged in to
the mains, during fi rst 10 minutes of its
performance, possible temperature sensor
failure will be displayed according to
following table:
Refrigerator Evaporator
sensor failure
Refrigerator sensor failure
Refrigerator & Evaporator
sensor failure
Legend:
Led off
The appliance will work preserving the food
stored, but it is necessary to contact after-
sales service and provide alarm code.
Led fl ashing
10