Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11.
Cleaning and maintenance
•
Keep protective devices, air vents and the motor housing as free of dust and dirt as possible. Rub the product clean with
a clean cloth or blow it off with compressed air at low pressure.
•
We recommend that you clean the product directly after every use.
•
Clean the product at regular intervals using a damp cloth and a little soft soap. Do not use any cleaning products or
solvents; they could attack the plastic parts of the product. Make sure that no water can penetrate the interior of the
product. Water penetration increases the risk of an electric shock.
•
The interior of the product has no further internal parts that require maintenance.
12. Repair & ordering spare parts
After repairs or maintenance, make sure that all safety-related parts are installed and are in perfect condition. All parts which
may cause injury must be kept where they are inaccessible to children or others.
Attention: According to the German Product Liability Act, no liability is accepted for damage caused by improper repairs
or by not using original spare parts.
Such work should be performed by a customer service centre or an authorised specialist. The same applies to accessory
parts.
Spare parts and accessories can be obtained from our Service Centre. To do this, scan the QR code on the front page.
Connections and repairs
Connections and repair work on the electrical equipment may only be carried out by electricians.
Please provide the following information in the event of any queries:
•
Type of current for the motor
•
Machine data - type plate
•
Motor data - type plate
Important note in the case of repairs:
For return delivery of the product for repair, please ensure for safety reasons that it is free of oil and fuel when it is sent to
the service centre.
www.scheppach.com · service@scheppach.com
Werbung
