Herunterladen Diese Seite drucken

Scheppach 5909252948 Original Bedienungsanleitung Seite 32

Akku-handkompressor ac10/8v

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

f.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) pro-
tected supply.
Use of an RCD reduces the risk of electric shock.
Personal safety
a.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of carelessness when using electrical tools can result in serious injuries.
b.
Wear personal protective equipment and always safety goggles.
Protective equipment such as a dust mask, non-skid safety shoes, safety helmet or hearing protection used for
appropriate conditions will reduce personal injuries.
c.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power
source and/or rechargeable battery, picking up or carrying the tool.
Carrying electric tools with your finger on the switch or connecting power tools to the power supply when they are
already switched on invites accidents.
d.
Remove any adjusting tools or spanners/keys before turning the power tool on.
A tool or spanner that is located in a rotating device part may result in injuries.
e.
Avoid abnormal postures.
Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situ-
ations.
f.
Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g.
If dust extraction and collection devices can be mounted, make sure that they are connected and used
properly.
Use of dust extraction can reduce dust-related hazards.
h.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool
safety principles.
A careless action can cause severe injury within a fraction of a second.
Power tool use and care
a.
Do not overload the device.
Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate
for which it was designed.
www.scheppach.com · service@scheppach.com

Werbung

loading