Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be con-
trolled with the switch is dangerous and must be repaired.
c.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the pow-
er tool before making any adjustments, changing accessories, or storing power tools.
These precautionary measures will prevent the electric tool from starting unintentionally.
d.
Store idle power tools out of the reach of children.
Do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e.
Maintain power tools and attachments.
Check whether moving parts function properly and do not get stuck and whether parts are broken or are damaged
and thus adversely affect the electric tool function. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc. in accordance with these instructions.
Take into account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h.
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected
situations.
Service
a.
Only have your power tool repaired by qualified specialists and only with original spare parts.
This ensures that safety of the electric tool is maintained.
Safety instructions for compressors
m Attention! The following basic safety measures must be observed when using this compressor for protection against
electric shock, and the risk of injury and fire.
Read and observe these instructions before using the device.
Safe work
1.
Keep the work area orderly
Disorder in the work area can lead to accidents.
-
2.
Take environmental influences into account
www.scheppach.com · service@scheppach.com
Werbung
