Werbung
6.2
Bode 100 specifications
Table 6-2: Bode 100 Revision 2 specifications:
Characteristic
Frequency range
OUTPUT
Waveform
Signal level range
Source level accuracy
Source level frequency response (flatness)
Frequency accuracy after adjustment
Frequency resolution (step size)
Source impedance
Return loss (1 Hz to 50 MHz)
Spurious signals & harmonics
Maximum reverse signal / power
INPUT CH 1, INPUT CH 2
Input impedance (software switchable)
1 MΩ input impedance
50 Ω input impedance return loss
Receiver bandwidth (RBW) software selectable
Input attenuator (software selectable)
Full-scale ac input signal
Input channel sensitivity (typical)
Maximum dc voltage
Input channels dynamic Range
Noise floor (S21 measurement)
RBW = 10 Hz, PSOURCE = 13 dBm, Attenuator
CH1: 20 dB, CH2: 0 dB
Warn-up time (3τ)
Gain Error (User-Range calibrated)
Phase Error (User-Range calibrated)
OMICRON Lab
Rating
1 Hz to 50 MHz
Sinusoidal
-30 dBm...13 dBm
7 mVrms...1 Vrms (50 Ω load)
14 mVrms...2 Vrms (no load)
±0.3 dB (1 Hz to 1 MHz)
±0.6 dB (1 MHz to 50 MHz)
±0.3 dB (typical, referring to 10 MHz)
± 2 ppm ± 0.5 stepsize
6.05 mHz (1 Hz to 100 Hz)
36.32 mHz (100 Hz to 50 MHz)
50 Ω
>30 dB, >35 dB (typical)
<-25 dBc at full output power (typical)
0.5 W = 5 Vrms (≤ 3.3 Vdc recommended)
High: 1 MΩ (ac-coupled)
Low: 50 Ω (dc-coupled)
1 MΩ ±0.5% || 40...55 pF
> 28 dB, >35 dB typical (dc to 50 MHz)
1 Hz, 3 Hz, 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz,
3 kHz , 5 kHz
0 dB, 10 dB, 20 dB, 30 dB, 40 dB
100 mVrms @ 0 dB input attenuator
316 mVrms @ 10 dB input attenuator
1 Vrms @ 20 dB input attenuator
3.16 Vrms @ 30 dB input attenuator
10 Vrms @ 40 dB input attenuator
< 1 µVrms (0 dB attenuator, 10 Hz RBW)
1 MΩ input impedance: 50 V
50 Ω input impedance: 7 V
> 100 dB (@ 10 Hz RBW)
1 Hz to 10 kHz: -115 dB (typical)
10 kHz to 10 MHz: -125 dB (typical)
10 MHz to 50 MHz: -105 dB (typical)
62 min*
< 0.1 dB
< 0.5°
Technical data
25
Werbung
