Werbung
If the above mentioned general hints don't help you resolve your issues using your Bode 100, please
check out the hints below.
Bode 100 specific connection issues
If you still have issues connecting to your Bode 100, please check:
1. Try re-installing Bode Analyzer Suite. Note that you will need admin rights to install the required
USB drivers.
2. Connect your Bode 100 to the computer and open device manager. You should find the Bode 100
under OMICRON Devices. If there is a question mark or a warning triangle icon besides the
Bode 100, try to right-click it and select update driver. This should re-install the USB driver. If the
driver is successfully installed, it looks as shown below:
3. Avoid the use of USB hubs and plug your Bode 100 directly into an USB port of your computer.
4. Try to connect Bode 100 to a different USB port or a different computer. Some USB 3 ports cause
issues with older Bode 100 Revision 1 devices.
5. The older generation Bode 100 Revision 1 devices don't work on computers with AMD Ryzen
processors. If you face this issue, please use a different computer or contact the
Support.
OMICRON Lab
Troubleshooting
OMICRON Lab
23
Werbung
