Werbung
Bode 100 Quick Start Guide
2.3
Designated use
Bode 100 and their accessories are especially designed for Gain/Phase, S-Parameter and Impedance
measurements of electronic circuits in laboratory and manufacturing environments.
Typical applications are:
•
Measurement of the complex transfer function of amplifiers, filters and attenuators
•
S-Parameter measurement in the 50 Ω domain
•
Stability assessment of control loops
•
Determination of resonance frequencies of piezo elements and quartz crystals
•
Impedance measurement of inductors, capacitors and resistors
Disclaimer
The advisory procedures and information contained within this document have been compiled as a
guide for a safe and effective operation of Bode 100. It has been prepared in conjunction with
application engineers and the collective experience of the manufacturer. The in-service conditions for
the use of Bode 100 may vary between customers and end-users.
Consequently, this document is offered as a guide only. It shall be used in conjunction with the
customers own safety procedures, maintenance program, engineering judgment, and training
qualifications.
Using Bode 100 or its accessories in a manner not specified by the manufacturer may result in
damage to property or persons.
10
OMICRON Lab
Werbung
