Technical Data; Maintenance And Cleaning; Disposal; Dimensions - D+H Bdt010-Rc Originalbetriebsanleitung

Technical Data

Type BDT 010-RC
Power supply 24 VDC ± 15 %
Ripple < 10 %
Rated current 1 A
Standby current max. 50 mA
Torque 10 Nm
Turning angle 90° or 180°
Running time app. 8 Sec. / 180°
Lifetime > 40.000 Cycles
Duty cycle 30 % (cycle time10min.)
Housing Zinc die casting, ABS,
polycarbonate
Ingress protection IP 40
Temp. range -5°C ... +60°C
Connection 6 pole screw terminal

Dimensions

48 mm
99.825.31 1.0/07/12

Maintenance and cleaning

Inspection and maintenance has to be carried out
according to D+H maintenance notes. Only original
D+H spare parts may be used. Repair is to be carried
out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.

Disposal

Electrical devices, accessories, batteries and packa-
ging should be sorted for environmental-friendly
recycling.
Do not dispose electrical devices and batteries into
household waste!
Only for EC countries:
According the European Guideline 2002/96/EC for
waste electrical and electronic equipment and its
implementation into national right, electrcal devices
that are no longer usable must be collected separa-
tely and disposed of in an environmentally correct
manner.
37 mm
45 mm
English
33/36
BDT 010-RC