Natural Ventilation With The Bdt 010-Rc - D+H Bdt010-Rc Originalbetriebsanleitung

Natural ventilation with the BDT 010-RC

Controlled natural ventilation with the BDT
010-RC fitting drive from D+H Mechatronic
and the activPilot Comfort PADM fitting
system from Winkhaus
• Automated, user-independent and energy-
efficient ventilation according to DIN 1946-6
• Reduction of ventilation heat losses and
resulting savings in heating costs
• Regulation of room air hygiene and effective
mould prevention
• Ventilation without any loss in security is
possible up to RC2
• A real alternative to ventilation systems
6 mm
With parallel positioning of only 6 mm and
limited pressure differences, sufficient
air exchange rates are provided for
raising room air hygiene.
99.825.31 1.0/07/12
A strong need for fresh air, comfortable
temperatures and excellent room air hygiene is a
crucial aspect in increasing the sense of well being
within your own four walls. But how do you
ventilate properly?
Either we ventilate too much and lose heat energy
in the process or we ventilate too little and feel
tired and weary as a result.
Controlled, fully-automated ventilation through a
combination of the BDT fitting drive from D+H
Mechatronic and the activPilot Comfort PADM from
Winkhaus enables you to achieve an optimal
combination of sufficient ventilation and low
heating requirements! Whether in the bathroom,
kitchen or bedroom – the stale air is constantly
exchanged and odours and pollutants are removed
permanently as a result! It's guaranteed to remove
the problems of mould and poor room air hygiene.
Window is
closed and locked
Window is openend app. 6 mm
in the parallel position and locked
ca. 6 mm
Window is wide open
(turn position)
English
19/36
BDT 010-RC