IKEA DATID OV8 Bedienungsanleitung Seite 16

ENGLISH
To refit the door
1. Insert the hinges in their seats.
2. Open the door fully.
3. Lower the two catches.
4. Close the door
Moving the top heating element (some
models only)
1. Remove the oven runners (Fig. 5).
2. Pull the heating element out a little
(Fig. 6) and lower it.
3. To reposition the heating element, lift
it up, pulling it slightly towards you,
making sure it comes to rest on the
lateral supports (Fig. 7).
Fig. 5
Fig. 6
To replace the rear lamp
1. Disconnect the oven from the power supply.
2. Unscrew the lamp cover (Fig. 8), replace
the lamp (see note for lamp type) and
screw the lamp cover back on.
3. Reconnect the oven to the power supply.
NOTE:
Only use 25-40W/230V type E-14, T300°C
incandescent lamps.
Lamps are available from IKEA After Sales
Service.
IMPORTANT: using halogen lamps, do
i
not handle with bare hands since
fingerprints can damage them.
Do not use the oven until the lamp cover has
been repositioned.
Fig. 7
Fig. 8
16