Silvercrest SECM 12 C7 Kurzanleitung Seite 17

2. Insert the connecting piece 4 in the mo-
tor unit 2.
3. Fit the mixing blade 5 to the connect-
ing piece 4.
4. Place the ring 7 on the container 8.
The handles are positioned in the re-
cesses of this container.
5. Take the bowl 6 out of the freezer bag
and place it on the ring 7.
6. Place the lid 3 on the ring 7 and turn
clockwise to secure.
7. Insert the power plug 9 in the wall
socket and move the 0/I switch 1 to I.
WARNING! Risk of material damage!
While making ice cream do not switch
the ice-cream maker off and then back
on. The ice cream mix would otherwise
freeze to the bowl 6 and block the mix-
ing blade 5.
8. Now pour the prepared mix into the
bowl 6 through the opening.
9. Leave the machine on until the ice
cream has the required consistency.
NOTE: If the ice cream has not become suf-
ficiently firm after 40 or so minutes, put in
the freezer until it has reached this firmness.
10. Move the 0/I switch 1 to 0 to switch
the ice-cream maker off.
11. Unplug 9 the appliance.
12. Turn the lid 3 anti-clockwise and remove.
NOTE: Removing the lid 3 will be easier if
you grasp it with both hands on the right
and left and then lift off.
13. Remove the ice cream you have made
using a rubber scraper or wooden
spoon (not supplied).
The ice cream produced will be spoon-
able. You can eat it straightaway, or if
you prefer it to be firmer, leave it in the
freezer for a while.
Recipes
For recipe suggestions, please consult the
online user instructions.
Disposal
Packaging and device must be disposed of
according to the environmental regulations
of your country.
Trouble-shooting
If your device fails to function as required,
please read the corresponding chapter in
the online user instructions.
15
GB