Silvercrest SECM 12 C7 Kurzanleitung Seite 15

sure you keep your hair, clothing and
other items well away from it.
Never touch the frozen bowl with wet
hands.
The bowl must be completely dry before
being put into the freezer.
Do not heat the bowl in excess of 40 °C.
Hard or sharp objects (e.g. metal
spoons) may damage the inside of the
bowl. Only ever use rubber scrapers or
wooden utensils when taking out the ice
cream you have made.
Switch the ice-cream maker on first and
only add the mix you have prepared to
the machine when running.
While making ice cream do not switch
the ice-cream maker off and then back
on. The ice cream mix would otherwise
freeze to the bowl and block the mixing
blade.
Never place the appliance on hot sur-
faces (e.g. a hob) or near sources of
heat or naked flame.
Only use genuine accessories.
The appliance is fitted with non-slip sili-
cone feet. As furniture is coated with vari-
ous varnishes and plastics and may be
treated with different cleaning products, it
cannot be completely ruled out that some
of these substances contain components
which may attack and soften the silicone
feet. If necessary, place a non-slip mat un-
derneath the appliance.
Do not use harsh or abrasive cleaning
agents.
All appliance accessories should be
cleaned by hand. The mixing blade 5
and the lid 3 can also be cleaned in the
dishwasher.
Should liquid leak from the housing of
the bowl, the bowl must be discarded.
Although this liquid is not toxic, it is un-
suitable for consumption.
The appliance includes protection from
overheating. This will switch the appli-
ance off to prevent the motor overheat-
ing. In this case unplug and wait until
the motor has cooled down, at least for
15 minutes.
Before using for the first
time
• Remove all packing materials.
• Check to ensure that all parts are pres-
ent and undamaged.
• Clean the device prior to its first
use!
Cleaning
DANGER!
Risk of electrocution!
Remove the power plug 9 from the wall
socket before cleaning the appliance.
The motor unit 2 must not be immersed
in water.
WARNING!
Do not use harsh or abrasive cleaning
agents.
1. Remove the mixing blade 5 and the
connecting piece 4 from the motor unit 2.
2. Figure A: push the two holders at the
bottom of the motor unit 2 together and
remove the motor unit 2 from the lid 3.
3. Grasp underneath the handles of the
ring 7 and lift the bowl 6 out of the
container 8.
Clean the motor unit
• Use a slightly damp, soft cloth to clean
the motor unit 2.
Clean the bowl
• Do not clean the bowl 6 until it has
cooled down to room temperature.
• Wash the bowl 6 in water not exceed-
ing 40 °C using a mild detergent.
13
GB