Before Operation; Clock Setting - Sharp R-8R50 Bedienungsanleitung

BEFORE OPERATION
* Before operating your new oven, make sure you 1) Plug in the oven.
read and understand this operation manual * The oven display will then begin flashing
completely. .
* Before the oven can be used, you must do the 2) Touch the STOP/CLEAR key.
following procedures. It is then recommended * will appear and all the keys on the
you set the correct time of day on the oven control panel will be active.
clock to ensure correct starting times for the At this point you can set the oven clock.
automatic features.
Clock Setting
* Suppose you want to enter the correct time of oe 11:34 (A.M. or P.M.).
Display
once.
Touch 10 MIN. key once and 1 MIN. key Le]
Touch AUTO START/CLOCK SETTING
key once more.
Touch 10 MIN. key 3 times and 1 MIN.
key 4 times.
Touch AUTO START/CLOCK SETTING
key once more.
NOTE: 1. This is twelve hour clock. (from 1:00 to 2. If the electrical power supply to your
12:59) microwave oven should be interrupted,
the display will intermittently show
[G8: 88] after the power is reinstat-
ed. If this occurs during cooking, the
programme will be erased. The time of
day will be also erased. Simply resetthe
clock for the correct time of day.
50/GB-6