Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Note:
Read the whole text of the operating manual before
assembly and commissioning. This operating manual
should help you familiarise yourself with your power tool
and teach you how to use it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the power tool in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work. The power tool may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards. The
required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country, the
generally recognised technical rules relating to the oper-
ation of such devices must also be observed.
20 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (fig. 1-4)
1.
Compressed air hose holder
2.
Transport handle
3.
ON/OFF switch
4.
Mains cable holder
5.
Air blow gun holder
6.
Tyre inflater holder
7.
Conical adapter (swimming accessories)
8.
Adapter for tyre valves
9.
Ball needle
10. Tyre inflater
11. Air blow gun
12. Mains cable
13. Compressed air hose with quick coupling
14. Adapter storage compartment
3. Scope of delivery
• Compressor
• Tyre inflater
• Air blow gun
• 3 piece adapter set
• Operating manual
4. Proper use
This device is suitable for inflating car, motorcycle and
bicycle tyres, sports balls, beach balls, air mattresses
and similar objects.
This device is not suitable for tyres with a very large
volume, such as lorry and tractor tyres.
The compressor may only be operated in a dry and
well ventilated indoor space.
The machine may only be used in the intended manner.
Any use beyond this is improper.
The user/operator, not the manufacturer, is responsible
for damages or injuries of any type resulting from this.
Please note that our equipment was not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the device is used in
commercial or industrial applications, or for equivalent
work.
www.scheppach.com
Werbung
