Werbung
Verfügbare Sprachen
Verfügbare Sprachen
h.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
A careless action can cause severe injury within a
fraction of a second.
Power tool use and care
a.
Do not overload the device.
Use the correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
c.
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing pow-
er tools.
These precautionary measures will prevent the
electric tool from starting unintentionally.
d.
Store idle power tools out of the reach of chil-
dren.
do not allow persons unfamiliar with the power
tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of
untrained users.
e.
Maintain power tools and attachments.
Check whether moving parts function properly and
do not get stuck and whether parts are broken or
are damaged and thus adversely affect the electric
tool function. If damaged, have the power tool re-
paired before use. Many accidents are caused by
poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions.
Take into account the working conditions and the
work to be performed. Use of the power tool for op-
erations different from those intended could result
in a hazardous situation.
h.
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
22 | GB
Service
a.
Only have your power tool repaired by quali-
fied specialists and only with original spare
parts.
This ensures that safety of the electric tool is main-
tained.
Safety instructions for compressors
m Attention! The following basic safety measures
must be observed when using this compressor for pro-
tection against electric shock, and the risk of injury and
fire.
Read and observe these instructions before using the
device.
Safe work
1.
Keep the work area orderly
- Disorder in the work area can lead to accidents.
2.
Take environmental influences into account
- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet environ-
ment. There is a risk of electric shock!
- Make sure that the work area is well-illuminated.
- Do not use electric tools where there is a risk of
fire or explosion.
3.
Protect yourself from electric shock
- Avoid physical contact with earthed parts (e. g.
pipes, radiators, electric ranges, cooling units).
4.
Keep away from children!
- Do not allow other persons to touch the tool and
cable, keep them away from your work area.
5.
Securely store unused power tools
- Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6.
Do not overload your electric tool
- They work better and more safely in the specified
output range.
7.
Wear suitable clothing
- Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
- Rubber gloves and anti-slip footwear are recom-
mended when working outdoors.
- Tie long hair back in a hair net.
8.
Do not use the cable for purposes for which it is
not intended
- Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
www.scheppach.com
Werbung
