Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
SEAT BELT
Seat Belt (Positioning Belt) (if applicable)
• Your power scooter may come equipped with a seat belt, which can be adjusted for operator com-
fort. The seat belt is intended to support the operator to prevent sliding down or forward in the seat.
It is not designed as a restraining device
• To Adjust the Seat Belt: Once seated, insert the metal or plastic tab on one side of the belt into the
plastic housing on the opposite side until you hear a click. Pull the excess strap attached to the
metal tab until secure, but ensure it's not too tight to cause discomfort.
• To Release the Positioning Belt: Press the push-button mechanism on the plastic housing.
• The seat belt (positioning belt) should always be secured. Never allow it hang on drag on the
floor, as it may become entanglend.
WARNING: The seat belt (positioning belt) should always be secured. Never allow it hang on drag
on the floor, as it may become entangled.
WARNING! The seat belt (positioning belt) is not intended for use as a seat belt in a motor vehicle.
Furthermore, your scooter chair is not suitable for use as a seat in any vehicle. Anyone traveling in
a vehicle should be properly belted into seats approved by the vehicle manufacturer.
WARNING! Ensure the seat belt (positioning belt) is properly secured to the power scooter and ad-
justed for operator comfort before each use.
WARNING! Inspect the seat belt (positioning belt) for loose parts, damage (including tears, worn
spots, bent hardware, damaged latch mechanisms), dirt, or debris before each use of the power
scooter. If any issues are found, contact your dealer.
61
English
Werbung
