Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Battery
Charging Port
Cover
Charger Requirements
• The charger should only be used for charging the batteries.
• Caution: Do not use, sit on or power on your scooter while it is charging.
Charger Technical Data
• Input voltage: AC220V (110V) ±10%
• Output voltage: 36V/DC
• Output current: 1.5~5A
Charger Use and Care
• A full charge requires 5 to 8 hours.
• Do not overcharge for more than 12 hours.
• To prevent shortening your battery's life, charge at least once per month when not in use.
• Do not stop charging until the process is complete.
• Repeated use of less than fully charged batteries will shorten their lifespan.
• When fully charged, the power indicator turns green. Do not stop charging until this indicator is
lit.
• Turn off the power supply after charging to prevent battery discharge.
• Avoid over-charging for more than 12 hours as it is dangerous.
Follow These Rules to Avoid Issues with Chargers:
• Use a national standard charger with an output voltage of 24V/DC 1.5A~5A. If you are in need of
a replacement charger, please contact us directly to purchase an original charger that is designed
for your specific mobility product.
• Ensure the charger is well ventilated during charging.
• Do not expose the scooter tto direct sunlight or humidity.
• Charge within a temperature range of 50 to 104 °F (10 to 40 °C).
BATTERY & CHARGER
Charging the Battery:
• Open the battery charging port cover.
• Use the provided charger to charge your scooter.
Additional Notes:
• Keep the battery charging port cover closed at all times, except
while charging the scooter.
• Please pay attention to all the safety notices in this user manual.
• Incorrect insertion of the battery may pose a risk of explosion. Only
use batteries provided with this unit.
Battery Charging Port
58
English
Werbung
