ENGLISH
Grinding capacity
For further control of the amount of ground coffee, it is possible to apply a factor to increase or
decrease the amount of ground coffee. The value displayed will be multiplied by the amount of
ground coffee selected. If the number selected is greater than 1, the quantity of ground coffee
will be greater than normal; if the number selected is less than 1, the quantity of coffee will be
less. Values from 0.7 to 1.3
Factory settings
You can then perform a reset of various parameters to factory settings:
-
Reset drinks
-
Reset parameters
-
Reset to factory settings
3.6.5 Machine information
The following section provides information on the use of the machine:
-
Total cups: displays the total number of cups and the total for each drink.
-
Maintenance records: displays the total cleanings and the total for each drink.
-
Software version: displays the software version, HMI, and model.
-
Machine information.
3.6.6 Display lock for cleaning
When activating this function, the appliance will lock the display for 10 seconds to allow the
display to be cleaned without generating any unwanted keystrokes.
3.6.7 Switch-off
Press this option to switch off the appliance. Confirm if you want to switch it off.
4. CLEANING AND MAINTENANCE
The cleaning of the coffee machine is the most important point on the maintenance of the
appliance. A quick daily cleaning of the brewing system is necessary. In addition, after each use
of the milk system, it should be given a quick cleaning of the milk system.
After each use, milk forms deposits in the ducts through which it passes, even blocking them.
In addition, bad tastes and odours can be generated by the accumulation and degradation of
the same.
It is essential for the proper functioning of the milk system and cappuccinatore that the ducts
are clean. One of the main reasons why milk is no longer well steamed and frothed is the
accumulation of milk in these ducts.
The following daily cleanings are recommended:
56
CREMMAET TOUCH OCS