cecotec CREMMAET TOUCH OCS Bedienungsanleitung Seite 54

ENGLISH
- Steps: this sequence allows you to adjust each parameter for each step. These parameters
have been explained in section "3.4 Drinks preparation".
- You can test the selected configuration to see if it is to your liking, if so, press "Save" to save
the final drink configuration.
NOTE: you can switch between users by pressing on the user icon at the top centre of the
display. Remember that each user has their own preset drinks.
User settings
- After selecting this menu, the 8 available users are displayed. Press the name box to name
the user.
- To replace the image, you must insert a USB drive at the bottom left of the display.
NOTE: the image to be replaced in the drink must respect an image size of 100x100 pixels,
maximum 2 MB in size, in PNG format and the file name may only contain letters and numbers.
- Once you have selected the name and image press "Save".
- To delete users, press the bin icon in the top right corner, then press the user(s) you wish
to delete and press "Save".
Maintenance settings
In the following section you can adjust the maintenance parameters of the machine, such as
when the appliance will demand cleaning.
- Preheating setting for brewing system: this setting allows us to heat the brew unit with
hot water to improve the subsequent extraction of the coffee. The appliance will ask you
whether or not you want to warm up. For example, if you select 5 minutes, after 5 minutes
you will be asked before making the coffee whether or not you want to warm up. After that
coffee, you must wait 5 minutes for the appliance to ask you again if you want to heat up
the brew unit.
- You can select: "No", "Now", "In 5, 10, 15 or 20 minutes", and "In 2 hours".
- Quick cleaning settings for milk system: allows you to select after how many uses of the
milk system the machine will ask for quick milk system cleaning.
- You can select: "No", "Now", "In 5, 10, 15 or 20 minutes", and "In 2 hours".
- Brewing system deep cleaning settings (number of cups): allows you to select the number
of coffees after which the machine will ask for deep cleaning of the brewing system.
- Selectable from 100 to 1000 coffees.
- Milk system deep cleaning settings (number of cups): allows you to select after how many
uses of the milk system the machine will ask for a deep cleaning of the milk system.
- Water hardness settings: water hardness is one of the most important factors affecting
the lifetime of the coffee machine. The appliance allows you to vary the hardness of the
water you use. The Merk scale is used to measure water hardness by analysing the amount
of milligrams of calcium carbonate per litre of water. Between 100 and 500 values, being
the lowest for soft water and the highest for very hard water.
54
CREMMAET TOUCH OCS