cecotec CREMMAET TOUCH OCS Bedienungsanleitung Seite 49

5. Switch on the coffee machine. Press the power switch that is at the back of the appliance.
The display will light up and start a process of preparing and starting the coffee machine
(Filling water - Checking - Warming up - Quick cleaning), after which you can select the
drink, you wish to prepare.
3.3 Switching off the coffee machine
Method 1
When the coffee machine is in standby mode, press and hold the button on the top of the
appliance for 3 seconds. Then, follow the steps until the machine enters standby mode. To exit
this mode, press and hold the button again for 3 seconds.
Method 2
1 Press the shortcut icon at the top of the display to open the drop-down menu.
2 In this menu, press the "Switch off" option.
3 Then, follow the steps until the machine enters standby mode. (In standby mode, press
and hold the button on the top of the machine for 3 seconds to restart it).
4 When the machine is in standby mode, you can press the switch at the back of the machine
to the off position to switch the machine completely off.
Note: do not turn this switch to the off position if the machine is not in standby mode. Doing so
could damage the coffee machine.
3.4 Drinks preparation
The coffee machine has 16 types of drinks, one of which comes with no settings so that it can
be adjusted from scratch. To select one of them, scroll through the drinks list containing all the
preparations and press the one you want to prepare.
NOTE: all drinks are configurable.
Coffee drinks
For example, an Espresso.
Press the Espresso icon and select the parameters.
1.
2. During the coffee preparation process, press the cup icon
setting parameters. You can change the selected parameters during the preparation of
the drink. The appliance will modify the step parameters during the preparation if the step
being performed has not been completed. Parameters changed during the preparation of
the drink will not be remembered by the appliance.
From this screen you can adjust the coffee settings.
3.
4. If you want to stop the drink preparation process, press "Cancel", located below the circle
on the left that marks the percentage of the completed process.
NOTE: in section "3.6.4. Machine settings" → Custom settings → Preparation mode, you can
select whether or not you want the parameters to be changeable before preparing the drink.
ENGLISH
on the display to display the
CREMMAET TOUCH OCS
49