Maintenance And Care - Lorelli Eliza Bedienungsanleitung

19. Adult assembly is required.
20.The package contains small parts in its unassembled state.
21. Images on the title page and in the instruction manual are only illustrative and may differ from the
real product.
22. Before using the product for the first time, remove all advertising materials from it as well as the
material used to attach them to the product.
23. Before use, remove and dispose of all plastic bags and packaging materials and keep them out of
reach of children to avoid danger of suffocation.
Photo А
1. Metal Frame - 1pcs.
2. Rear Pipe - 1pcs.
3. Baby Lounge Body - 1pcs.
4. Toybar - 1pcs.
1. Washing instructions of the upholstery:
Wipe with damp clean cloth and with mild detergent. Do not iron. Do not dry clean.
2. Do not bleach. Do not tumble dry. Dry naturally.
3. Check the durability of the fabric and stitches after every wash.
4. Do not leave the product exposed to the sun for a long period of time; the fabrics may discolour.
5. Metal parts, plastic parts, toy bar with toys: wipe with damp clean cloth and soft soap and dry well.
Do not use harsh or abrasive cleaners.
1. Insert both pipes of the metal construction of the baby lounge into the pipes of the main body of the
lounge (picture 1) by pressing the metal element (picture 2).
2. Insert the rear pipe of the lounge into the assembled metal frame by following the same operations
as in point 1.
3. Fasten the textile belts on the back side of the lounge. ( picture 3)
4. To install the toybar aim and press the attaching clips to the metal body pipes until "click" sound is
heard. (picture 4)
There are five positions of the backrest:
1. By simultaneously pressing the buttons of the adjusting mechanisms of the backrest put it in the
chosen position. (picture 5)
2. Unlock the buckle of the safety belt by simultaneously pressing the both wafers. (picture 6)
Swinging function:
3. Swinging function is activated when the four plastic elements on the metal frame are in position
shown in picture 7.
4. For stationary position of the baby lounge ( not to swing ) turn the plastic elements on the metal
frame. ( picture 8)
PARTS

MAINTENANCE AND CARE

INSTALLATION
USAGE
6