Making Espresso - Rondell Rde-1114 Betriebsanweisung

Notes: If you are not using the coffee machine, the startup
screen will turn off after a while.
– To turn the coffee machine on, press the ON button (16) (fig. 6).
When you turn the coffee machine on, heating and self-diag-
nostics turn on automatically, and the automatic system flushing
mode sets off.
ATTENTION! Risk of burns!
During automatic washing a small amount of hot
water pours out of the coffee dispensing unit (2).
Avoid direct contact with splashes of hot water.
– When the above processes have been completed, the coffee
machine will be ready for use and the display (7) will show the
main menu with the available options (fig. 7).
Notes: The display (7) has a touch-sensitive panel, to select
the desired operating mode, just touch the corresponding icon.
Touch the touch-sensitive display (7) only with your fingers.
Touch-sensitive display may not respond to touch if your fin-
gers are cold.
ATTENTION! Touch-sensitive panel can be scratched with
pointed or sharp objects such as pencils.
Switching the coffee machine off
– To turn the coffee machine off and put it into standby mode,
press and hold the button (16) for 2 seconds, this will start the
automatic system flushing mode.
Notes: If you are not going to use the coffee machine for a long
period of time, you should set the power switch (17) to the «0»
position (fig. 4).
ATTENTION! In order to avoid damage to the mechanical parts
of the coffee machine, the power switch (17) should be set to the
«0» position only after the coffee machine has been completely
turned off using the button (16) from the standby mode.
Selecting the menu display language
(Russian is set by default)
– To select the coffee machine menu display language, touch
the «MENU» icon on the main menu (fig. 7) and go to the
settings menu (sig. 8). Select the desired language by suc-
cessively pressing the «LANGUAGE» icon (fig. 8). To return
to the main menu, touch the «
1 minute.
MAKING COFFEE DRINKS
– The cups being used must be preheated. To do this, place the
cups on the heated cup tray (18), during the operation of the
coffee machine, the tray (18) heats up while heating the cups.
To prepare the desired coffee drink, touch the corresponding
icon on the main menu. If you need to make several cups in a
row, then press the « » icon on the menu of the selected drink
before each cup is finished. For each cup, coffee beans are fully
ground, brewed and prepared separately. The display shows the
progress of the coffee making process. Do not forget to place the
empty cup in time!
Use the «
so, or to make two cups of these drinks at the same time.
To force stop the coffee making process, press the «
To get a quality drink, follow these recommendations:
– When making drinks, first adjust the coffee grinding degree
of the coffee grinder. Coffee grinding degree adjustment is
described in the «FUNCTIONALITY» chapter.
– Before making a cappuccino, latte, hot milk or frothed milk, be
sure to read the «Selecting milk», «Preparing the milk sys-
tem», «Adjusting the milk system» sections.
– To change the settings when making coffee drinks, see the
«Changing the coffee making program settings» section.
MAKING AMERICANO
– Place a suitable cup under the coffee dispensing unit (2) of the
coffee machine and adjust its height (fig. 9).
– Touch the «AMERICANO» icon on the main menu, the amer-
icano menu will appear on the display and the coffee making
process will start at once.
– When the coffee machine has made the programmed amount
of drink, the coffee making process will end automatically.
– To prepare a double portion or the next cup, touch the «
icon before the coffee making process is finished.
– To force stop the coffee making process, touch the «
– When the coffee making process is finished, take the cup with
the drink away.

MAKING ESPRESSO

– Place a suitable cup under the coffee dispensing unit (2) of the
coffee machine and adjust its height (fig. 10).
– Press the «ESPRESSO» icon on the main menu, the espresso
menu will appear on the display and the coffee making pro-
cess will start at once.
– When the coffee machine has made the programmed amount
of drink, the coffee making process will end automatically.
» icon, or wait for about
– To prepare a double portion or the next cup, touch the «
icon before the coffee making process is finished.
– To force stop the coffee making process, touch the «
– When the coffee making process is finished, take the cup with
the drink away.
MAKING CAPPUCCINO, LATTE, HOT MILK
– Place a cup of a suitable volume under the coffee dispensing
unit (2) of the coffee machine and adjust its height, put the milk
tube (20) into the milk container (fig. 11).
25
» function to make a double Americano or Espres-
» icon.
»
» icon.
»
» icon.