Making Beverages - Rondell Rde-1117 Betriebsanweisung

– When the coffee machine is switched on, the heating and
self-diagnostics turn on automatically, and the automatic sys-
tem cleaning activates, while the progress is shown on the
display of the control panel (7). A small amount of hot water
will flow from the coffee spout (9) during the automatic sys-
tem cleaning.
Exercise caution during the automatic system cleaning!
– Once the above processes have been completed, the coffee
machine will enter standby mode and will be ready for use.
Informational symbols for operating modes and a display
showing the total number of coffee cups that have been made
will appear on the control panel (7) (fig. 5).
Note:
– The operation mode buttons on the control panel (7) are
touch-sensitive. To select a mode, simply touch the respec-
tive button; each button press is accompanied by a short
sound signal.
– To prevent drops from splashing, always adjust the height of
the coffee spout (9) to match the cup height.
– To avoid overfilling the removable drip tray (11) with dirty water
during cleaning, place a cup or suitable container under the
coffee spout (9) (fig. 4).
Turning off the coffee machine
– Place a suitable container for liquid drainage onto the metal
drip tray grid (11) and adjust the coffee spout (9) to the appro-
priate height (fig. 4).
– To switch the coffee machine off, press and hold the on but-
ton (10) « » (Fig. 4).
– When the coffee machine is switched on, the heating and
self-diagnostics turn on automatically, and the automatic sys-
tem cleaning activates, while the progress is shown on the
display of the control panel (7). A small amount of hot water
will flow from the coffee spout (9) during the automatic sys-
tem cleaning.
During the flushing process, the «CLEAN» flushing symbols will
be shown on the control panel display and the illumination of
the coffee supply unit will turn on. Once the cleaning process is
complete, the symbols on the display will turn off, and the coffee
machine will power down.
ATTENTION! For long-term and effective use of the coffee ma-
chine, it is necessary to regularly clean and maintain it. In order
to do this, read carefully the chapter «Periodic maintenance of
the coffee machine».

MAKING BEVERAGES

Preheat the cups that will be used. To do this, place the cups onto
the cup warming tray (6). During operation the warming tray (6)
heats up, warming the cups.
To get a quality beverage, follow these recommendations:
– Adjust the grinding size before preparing beverages.
Coffee grinding degree adjustment is described in the
«FUNCTIONALITY» chapter.
– Before making a cappuccino, latte, hot milk or frothed milk,
be sure to read the «Selecting milk», «Preparing the milk
system» sections.
– You can only modify the settings during beverage preparation.
Note: During preparation of coffee drinks and supply of hot wa-
ter/milk, the illumination of the coffee supply unit switches on.
Making Espresso
1. Install a suitable coffee cup on the metal grid of the tray (11)
and adjust the height of the coffee spout (9) (fig. 6).
2. Press the button «Espresso» «
3. Adjust the amount of ground coffee and its volume during the
preparation of the beverage, while the values of the adjustable
variables will be shown on the control panel display (7).
When the coffee grinder is running (the «g» symbol is displayed
on the top right side of the screen), press the «+» or «-» button
to adjust the amount of ground coffee in grams. When brewing
coffee (the «ml» symbols are displayed on the top right side of
the screen), press the «+» or «-» button to adjust the volume of
brewed coffee in milliliters. Press the button «x2/CLEAN» «
to make 2 cups of coffee. To force the end of the preparing pro-
cess, press the button «MENU/EXIT» «
Making Americano
1. Install a suitable coffee cup on the metal grid of the tray (11)
and adjust the height of the coffee spout (9) (fig. 6).
2. Press the button «Americano» «
3. Adjust the amount of ground coffee and its volume during the
preparation of the beverage, while the values of the adjustable
variables will be shown on the control panel display (7).
When the grinder is running (the «g» symbol is displayed on the
top right side of the screen), press the «+» or «-» button to adjust
the amount of ground coffee in grams. When brewing coffee (the
«ml» symbols are displayed on the top right side of the screen),
press the «+» or «-» button to adjust the volume of brewed cof-
fee in milliliters. When supplying water (the «ml» symbols are
displayed on the top right side of the screen), press the «+» or
«-» button to adjust the volume of supplied water in milliliters.
Press the button «x2/CLEAN» «
To force the end of the preparing process, press the button
«MENU/EXIT» « ».
Dispensing hot water
1. Install a suitable cup on the metal grid of the tray (11) and ad-
just the height of the coffee spout (9) (fig. 6).
19
» to start preparing (fig. 7).
»
».
» to start preparing (fig. 8).
» to make 2 cups of coffee.