Functionality And Operation; Making Drinks - Rondell Rde-1108 Bedienungsanleitung

FUNCTIONALITY AND OPERATION

Connecting the coffee machine
Insert the power cord into the socket on the rear side of the panel
and connect the unit to the mains (pic. 2).
Note: The operation mode buttons on the control panel (5) are
sensory, you just need to touch the button to switch the neces-
sary operation mode on.
Switching the coffee machine on
Step 1
Press the switch (16) to the position «I» (pic. 6).
Step 2
The unit will be switched on and start operation, and the startup screen
will appear (pic. 7). The message «Launch» will appear in the right bot-
tom corner. Press and wait until the coffee machine is loaded (pic. 8).
Step 3
When the machine is loaded, the menu will appeared on the dis-
play (pic. 9 and 10).
Coffee machine settings menu
Step 1
Touch the main menu icon and select the settings menu.
Touch the menu (pic. 11). Select the settings (pic. 12).
Press the tab «Cleaning» (pic. 13). Select one of 4 options: Milk
supply system cleaning, Washing, Deep cleaning, Descaling.
Press «Drink taste settings» - «Settings» (pic. 14).
In «Drink taste settings» menu you can select the type of drink
(pic. 14) and its settings (pic. 16).
You can select the tab «Locked» in the «Drink taste settings»
(pic. 15). When you activate it, you cannot change the drink set-
tings from the display.
When you select the tab «Coffee maker settings»: Language
(pic. 17), «Timer» (pic. 18). In «Timer» function you can select the
coffee machine switch off time: 0.5 h, 1 h, 2 h, 3 h... 24 h, «Milk
system cleaning time» function (pic. 19), «Descaling settings»
(pic. 20). Display brightness levels (pic. 21) - 3 levels. Process
control function (pic. 22).

MAKING DRINKS

(See the table below for making actual drinks)
Beverage name Ground beans
weight, g
Espresso
Single cup / Double cup
Default
Sound indication on function «Sound» (pic. 23), «Reset» func-
tion (pic. 24).
The tab «Calibration» (pic. 25) – settings for professional use.
The tab «Information» (pic. 26) – cup counter.
Water hardness adjustment
Removing the scales as necessary is of critical importance for
extending the useful life of the Coffee Machine. Set the water
hardness level to enable automatic descaling notifications.
For best results, use water hardness test strips to determine the
hardness of the water.
Touch the main menu icon on the display and select the settings
menu. Touch the menu (fig. 11). Select the settings (fig. 12). Touch
the «Coffee machine settings» menu item, then «Descaling set-
tings» (fig. 20). Based on the test strip data, select the correspond-
ing water hardness level in the coffee machine settings – from 1 to 4.
Level
Level 1
Level 2
Level 3
Level 4
The Coffee Machine will request permission to initiate descaling in
accordance with the selected water hardness level. After confirm-
ing the cleaning procedure, descaling will follow automatically.
Switching the coffee machine off
Step 1
Press the icon in the left bottom corner (pic. 27).
Step 2
Press
Step 3
After washing the coffee machine press the switch (16) to the
position «0».
Ready drink Frothed
amount, ml milk, sec
7-12 20-250
11 40
24
Water hardness, Descale after
mg/l (number of cups)
0-50
51-120
151-250
251-425
for 3 seconds (pic. 28). Washing will start (pic. 29).
Temperature, Warm milk,
°С sec
- 75-95
- 90
880
440
280
220
Hot water,
sec
- -
- -