Using The Device; Making Beverages - Rondell Rde-1118 Betriebsanweisung

ATTENTION! Only put whole roasted coffee beans into cof-
fee beans container (5). Please do not add water, ground,
instant coffee, instant coffee powder, or other freeze-dried
coffee-containing mixtures intended for rapid brewing with
hot water, coffee beans mixed with solid particles, processed
bean coffee containing sugar, caramel, never use coffee
beans out of the freezer, otherwise the knives of the coffee
grinder will be damaged.

USING THE DEVICE

Turning on the coffee machine
Insert the power plug into the mains socket.
– Install a container suitable for liquid drainage onto the
metal grate of the tray (11).
– To avoid direct contact with splashes of hot water, adjust
the coffee spout (9) to the appropriate height (fig. 4).
– To turn on the coffee machine, press the power button (10)
« », you will hear a sound signal, and the automatic sys-
tem cleaning will activate (fig. 4).
When the coffee machine is turned on, the heating and
self-diagnostics turn on automatically, and the automatic
flushing mode activates, while the progress shown on the
display of the control panel (7). A small amount of hot water
will flow from the coffee spout (9) during the automatic sys-
tem cleaning.
Exercise caution during the automatic system cleaning!
– Once the above processes have been completed, the
coffee machine will enter standby mode and will be
ready for use. Informational symbols for operating
modes and a display showing the total number of cof-
fee cups that have been made will appear on the control
panel (7) (fig. 5).
Note:
– The operation mode buttons on the control panel (7)
are touch-sensitive. To select a mode, simply touch the
respective button; each button press is accompanied by
a short sound signal.
– To prevent drops from splashing, always adjust the height
of the coffee spout (9) to match the cup height.
– To avoid overfilling the removable drip tray (11) with dirty
water during cleaning, place a cup or suitable container
under the coffee spout (9) (fig. 4).
Turning off the Coffee Machine
– Place a suitable container for liquid drainage onto the
metal drip tray grate (11) and adjust the coffee spout (9) to
the appropriate height (fig. 4).
– To turn off the coffee machine, press and hold down the
« » power button (10) for 3 seconds - you will hear a
sound signal and the automatic flushing mode will activate.
During the cleaning process, the «CLEAN» symbols will ap-
pear on the control panel›s display, and the coffee spout will
light up. Once the cleaning process is complete, the sym-
bols on the display will turn off, and the coffee machine will
power down.

MAKING BEVERAGES

Preheat the cups that will be used. To do this, place the cups
onto the cup warming tray (6). During operation the warming
tray (6) heats up, warming the cups.
To get a quality beverage, follow these recommendations:
– Adjust the adjust the grinding size before preparing bever-
ages. Grinding adjustment is explained in the «FUNCTION-
ALITY» section.
– Before making cappuccino, latte, hot milk, or milk froth,
make sure to review the «Milk Selection», «Milk Delivery
Preparation System»,
– You can only modify the settings during beverage prepa-
ration.
Note: During coffee beverage preparation and hot water/milk
dispensing, the coffee spout will activate.
Making Espresso
1. Install a suitable coffee cup on the metal grate of the tray
(11) and adjust the height of the coffee spout (9) (fig. 6).
2. Press the «Espresso» button «
(fig. 7).
3. Adjust the amount of ground coffee and its volume during
the preparation of the beverage, while the values of the
adjustable variables will be shown on the control panel
display (7).
During coffee grinding (the «g» symbol will be shown in the
top right corner of the screen), press the «+» or «-» button to
adjust the amount of ground coffee in grams. During coffee
brewing (the «ml» symbol will be shown in the top right corner
of the screen), press the «+» or «-» button to adjust the brewed
coffee›s volume in milliliters. Press the«х2» «
prepare 2 cups of coffee. Press the «Exit» «
force-terminate the process.
Making Americano
1. Install a suitable coffee cup on the metal grate of the tray
(11) and adjust the height of the coffee spout (9) (fig. 6).
2. Press the «Americano» «
21
» to start preparation
» button to
» button to
» to start preparation (fig. 8).