Herunterladen Inhalt Inhalt Diese Seite drucken

RONDELL RDE-1114 Betriebsanweisung Seite 29

Inhaltsverzeichnis
Cleaning milk frother outlets
1. Insert the milk frother (3) into the coffee dispensing unit (2)
(fig. 17).
2. Place the milk tube into a container with clean water and place
a cup under the coffee dispensing unit (2) (fig. 20).
3. Press the «MILK» icon on the main menu to start cleaning.
4. In the end drain the cup and repeat the above steps until the
outlets are flushed and completely cleaned of old milk.
Flushing the milk froather
1. Press the locks on the milk frother (3) (fig. 19) and remove it
from the coffee dispensing unit (2).
2. Put the frother into a container with warm clean water for a
while, then rinse it and dry it.
3. Put the milk frother back into the coffee machine (fig. 18).
Cleaning the coffee bean container
– Unplug the unit from the mains.
– Open the coffee bean container lid (19) and clean the inside of
the coffee bean container (10) with a dry soft cloth.
ATTENTION! Do not use water or sharp objects to clean the
container (10).
Cleaning the brewing unit
Notes: We recommend cleaning the brewing unit once a month.
1. Open the brewing unit compartment door (11) (fig. 30).
2. Remove the used coffee grounds container (13) (fig. 31).
3. Press the lock of the brewing unit as shown in (fig. 32) and
remove it from the coffee machine. Put the brewing unit (12)
in a container with warm clean water for a while, then rinse it
thoroughly under running water and dry it.
4. Clean the brewing unit compartment from ground coffee resi-
due (fig. 33) and wipe it with a soft, slightly damp cloth.
5. Put the brewing unit back to its original place and press lightly
until a characteristic click confirms that it is properly installed
(fig. 34).
6. Insert the used coffee grounds container and close the com-
partment door (fig. 35).
COFFEE MACHINE CLEANING MENU
To go to the coffee machine cleaning menu, press the «MENU»
icon on the main menu (fig. 7) and go to the settings menu (fig.
8). Press the «CLEANING» icon on the settings menu and go to
the coffee machine cleaning menu (fig. 29).
As required, press the desired icon, the display will show an icon
with the corresponding process, follow the instructions on the
display.
– Pressing the «FLUSHING» icon starts the flushing mode of the
water dispensing system, the system flushing icon will appear
on the display (fig. 36).
– Pressing the «CLEANING THE MILK SYSTEM» icon starts the
cleaning of the milk system (see description above), the icon
will appear on the display (fig. 37). To start the process, click
the «
» icon and follow further instructions.
– Pressing the «BREWING UNIT» icon starts the brewing unit
(12) cleaning process, the display will show the brewing unit
cleaning icon (fig. 38). To start the process, press the «
icon and follow further instructions (fig. 39). For the brewing
unit, use specialized tablets to clean the brewing unit from
coffee oils.
Notes: We recommend cleaning the brewing unit of coffee oils
after every 500 cups of coffee.
– Pressing the «DESCALING» icon starts the descaling of the
coffee machine and the icon appears on the display (fig. 40).
To start the process, press the «
instructions on the display.
DESCALING (decalcination)
To prolong the life of the coffee machine, it is critical to clean the
unit from scale in a timely manner. The descaling frequency de-
pends on water hardness in your region. To determine the level,
we recommend using paper indicator testers that are immersed
in water and change color depending on the amount of calcium,
magnesium and iron. Based on the data obtained, it is necessary
to choose one of the following decalcination frequency schemes:
Water
Level
hardness,
mg/l
Level 1 (soft)
0-50
Level 2
51-120
(moderately hard)
Level 3 (hard)
151-250
Level 4 (very hard)
251-425
To descale, use specialized coffee machine cleaners in the form
of liquids or tablets.
– Fill the tank (4) with clean water and add the descaling agent
according to the instructions for the cleaning agent and place
it in the coffee machine.
– Place a suitable container (at least 1.5 L) on the tray (1), under
the coffee dispensing unit (2).
– Press the «
» icon to start the descaling process (fig. 41).
The descaling solution will be dispensed at regular intervals and
the display will show a dynamic icon with the process (fig. 42).
29
»
» icon and follow further
The need to decalcify
(number of cups)
about 880
about 440
about 280
about 240
Inhaltsverzeichnis
loading

Inhaltsverzeichnis