If the milk tube is not in use, you can attach its free end to the tip
lock (fig. 21).
If you do not drink coffee drinks with milk at all, you can remove
the tip with the milk tube from the frother (3) and replace it with
the plug (supplied with the unit).
Adjusting the milk system
For best results, follow the recommendations for choosing milk.
The quality of the frothed milk depends on the quality and tem-
perature of the milk. It is recommended to use chilled whole milk.
Before making latte, cappuccino, hot milk or frothed milk, adjust
the milk frother (3) according to your preference. Open the left
door (5) and you will see the milk frother control knob (15) (fig. 22).
– Press the «MILK» icon on the main menu, after the coffee
machine has warmed up, the process of making frothed milk
will begin.
If in the process little froth or only hot milk comes out of the milk frother
(3) outlets, slowly turn the control knob (15) counterclockwise.
If in the process only steam and splashes of milk come out of the
milk frother (3) spout, the froth is not dense, there are too many
milk bubbles, slowly turn the control knob (15) clockwise.
Slowly turn the control knob (15) to select the optimal ratio.
Drip tray
When the level of liquid in the tray (1) rises to the upper limit, the
float level indicator rises, after which it is required to drain the liq-
uid from the drip tray.
Changing the program settings
You can change the drink making settings according to your pref-
erences.
– To change the drink making settings, press the «MENU» icon
on the main menu (fig. 23), and the display will show the coffee
machine settings menu (fig. 24).
– Press the «SETTINGS» icon, and the display will show the set-
tings menu for the first drink in the list, «AMERICANO», with
Below you will find a table with factory settings (default) and possible settings changes for each drink:
Ground beans
Name of the drink
weight, g
Americano
9-11
Default
10
Espresso
9-11
Default
10
Cappuccino*
9-11
Default
10
factory settings (fig. 25), while the icon of the drink itself and
the first setting parameter are highlighted with a frame of a
different color.
– Select the drink for which you want to change parameters, to
do this, press the corresponding menu icon (fig. 26).
– The options for making drinks are located on the right side of
the menu. Select the parameter you want to change.
– Set the required value by successively pressing the parameter
icon. Each time you press the icon, the parameter will change
with a certain setting step.
– Press the «QUICK START» icon to quickly start making the
drink.
– To save the settings and return to the main menu, press the
«
» icon or wait 45 seconds.
Americano settings: The coffee machine dispenses coffee first
and then hot water to reduce the amount of caffeine. You can se-
lect the amount of espresso «ml», the temperature of the drink
«°C», the weight of the ground coffee «g» and the volume of hot
water «ml». To save your new settings, click the «
Espresso settings: You can select the amount of espresso «ml»,
the temperature of the drink «°C», the weight of ground coffee
«g», set low or high pressure (low and high pressure are pump
functions). In order to get a cup of aromatic coffee, it is recom-
mended to use high pressure. To save your new settings, click
the «
» icon.
Cappuccino settings: The coffee machine dispenses frothed
milk first, and then espresso. You can select the amount of
espresso «ml», the temperature of the drink «°C», the weight of
ground coffee «g», and the milk frothing time «c». To save your
new settings, click the «
Latte settings: The coffee machine dispenses espresso first
and then frothed milk. You can select the amount of espresso
«ml», the temperature of the drink «°C», the weight of ground cof-
fee «g», and the milk frothing time «c». To save your new settings,
click the «
Ready coffee drink
Frothed milk,
amount, ml
sec
20-250
60
20-80
40
20-200
40
27
» icon.
» icon.
Temperature, °С
-
75-95
-
90
-
75-95
-
90
15-60
75-95
30
90
» icon.
Hot water, ml
0-200
80
-
-
-
-