Cosmo CFWME Montage- Und Bedienungsanleitung Seite 105

4. COMMISSIONING
Operation
Adjustment mode
Changing a value
Confirming a value
Next parameter
When the hydraulic system is filled and ready for operation, connect the controller to the mains.
The controller runs an initialisation phase in which the Lightwheel
When the controller is commissioned or when it is reset, it will run a commissioning menu after
the initialisation phase. The commissioning menu leads the user through the most important
adjustment channels needed for operating the system.
Commissioning menu
The commissioning menu consists of the channels described in the following. In order to make
an adjustment, adjust the desired value with the Lightwheel
(✓). The next channel will appear in the display.
Commissioning the single station
1. Language:
Î Adjust the desired menu language.
2. System type:
Î Select the system type single station.
3. Daylight savings time adjustment:
Î Activate or deactivate the automatic daylight savings time
adjustment.
4. Time:
Î Adjust the clock time. First of all adjust the hours, then the
minutes.
® glows green.
® and confirm with the right button
57