Scheppach hs 120 o Originalanleitung Seite 25

Fig. 9
4 nuts M6.
Tighten the bolts slightly by hand.
Fig. 10
Place the machine on its feet and firmly tighten all bolts
-
Fig. 11
Firmly tighten the wheel assembly in the position where
the wheels slightly touch the ground.
Fig. 12 / 12.1
Fasten the riving knife in line with the saw blade as de-
scribed in the illustration. Slightly release the bolt with-
doing this, it is necessary to remove the saw blade insert
25