Scheppach hs 120 o Originalanleitung Seite 11

ible.
hands from the rotating cutting tool.
ground.
lines.
nected to the power supply.
Trainees must be at least 16 years of age, but may only
operate the machine under adult supervision .
from their work.
tension if a second person is working at the circular
sawbench removing cut workpieces. The second person
may not stand anywhere else but at the take-off table
end.
chips and wood scrap.
and other jewelry.
see Electrical Connection.
moved or rendered unusable.
machine may only be carried out when the motor is
switched off. Pull the power supply plug and wait for
the rotating tool to completely stop.
when rectifying any malfunctions.
extractor during all work cycles. Please observe the
proper use of this.
and covers must be mounted.
blades.
not be used.
workpiece is fed through the splitting wedge, which
prevents the cut from closing behind the saw blade and
also prevents the workpiece from kicking back.
ing operation. It must stand horizontal above the saw
blade.
push-stick must be used to prevent you from hav-
ing to work with your hands near the sawblade.
Stop the machine to repair a failure or remove pieces
of wood which have become jammed. Disconnect the
mains plug.
when rectifying any malfunctions.
worn down. Pull power supply plug.
-
-
-
-
11