Silvercrest SWC 1000 D1 Kurzanleitung Seite 6

NOTICE
► Check the contents to ensure that everything is present and for signs of
visible damage.
► If the contents are not complete or are damaged due to defective packaging or
through transportation contact the Service Hotline (see chapter Service).
Unpacking
♦ Remove all parts of the device and the short manual from the box..
♦ Remove all packing material.
WARNING! RISK OF SUFFOCATION!
► Packaging materials should not be used as a play thing. There is a risk of
suffocation.
Disposal of the packaging
The recirculation of packaging into the material circuit saves raw material and
reduces the amount of waste generated. Dispose of packaging material that is
no longer needed as per the regionally established regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
SWC 1000 D1 GB │ IE │ 3 ■